Includes:
New Electrical Harness
This is a complete electrical harness “Plug and Play” to easily connect all the components of this kit and designed for a basic car or trucks applications.
Lengths are set from the Relay:
To the Under-dash evaporator (green wire) 5 ft.’s
To Pressure switch (on the drier) and ground 24 inches
To Compressor 6 ft.’s and Condenser fan 9 ft.’s
 
Compressor SD 508 Sanden Type 2A
Groove 12v can be change to a serpentine type compressor, just let us know
Condenser Parallel Flow
14X20in (18mm Core Depth) 4 Rails Aluminum
Evaporator Underdash Model CM-432-000
High quality case 30 pass 4 way all aluminum coil
Expansion valve 1.5 Ton
Thermostat and rotative 3 speed blower switch
Mounting brackets and drain hose and T included
12,700BTU capacity 359 CFM (real) do not get confused
 
Hoses
#6 5/16= 6 FT
#8 13/32= 4 FT
#10 1/2= 5 FT
W/Fitting and clamp filter
Drier w/pressures switch
2.5 X 7.5 in 3/8MIO X 3/8MIO W/ 1/4 CP ROI
Condenser fan
12″ Diameter 12 Volts 80W 6 AMP
Reversable – 4 Mounting Brackets included
10 ” A/C Flex Hose
4 Black Louvers of 2.5 inches inside diameter